High-Efficiency & Energy-Saving Fast Heating For Forge. Heavy high-pressure propane 55.2" hoses with regulator capable of managing pressures up to 20 PSI for safe distance and operation, QCC1 / Type 1 connection and 3/8" female flare fitting. Allows you to control the flow of air and gas and helps you get the right temperature for forging.Universal for standard US propane tanks and cylinders. This propane forge is an essential product for a hobbyist, blacksmith, jeweler, engineer, farrier, knife and metals maker, etc.
Perfect for forging your own knifes, blades, tongs, tools or horseshoes, heat-treating stocks, or bending and reshaping metal, etc. Work with most metals such as: gold, copper, silver, stainless steel, steel, brass, bronze, magnesium, aluminum, alloys, lead, tin, etc. Lined with 1 thick high density ceramic fiber blanket that no need pre-rigidized insulation coating to increase strength and efficiency of insulation, reduced fuel consumption and quick heating. Also provide superior durability and resistance to high velocity firing.
Includes two fire bricks (4.5" X 9" X 1.3) for the bottom. Roll formed premium grade rugged and durable 0.15 thick steel with 2600°F /1425? High temperature capacity, anti-impact, anti-corrosion and anti-rust for long-lasting reliability.Unique double burner square design and vertical firing system allow maximizes your metals exposure to the flame in the best position, and allowing for a more even and faster firing. Hose Length: 4.6 ft (1.4 m). Item Weight: 35.7 lbs (16.2 kg). Maximum Power: 35 kW (120,000 BTU/H). Fire Brick Size: 4.5 inches (Length) × 9.0 inches (Width) × 1.3 inches (Height). Forge Size: 19.02 inches (Length) × 8.03 inches (Width) × 7.95 inches (Height). Overall Size: 19.02 inches (Length) × 8.03 inches (Width) × 22.13 inches (Height). 0-20 PSI High Pressure Adjustable Regulator. Adjust the pressure regulator to control the firepower and the right temperature you need. QCC1 / Type 1 Connection.
Universal for QCC1/Type1 LPG standard US propane tanks and cylinders. Fits a male end with a 3/8 flare fitting. Gas lnlet Pipe with Brass Fitting. Tape and thread sealant are recommended for threaded joints.Allow you to move the hot forge or adjust its position when it is heated. Lined With 1 Thick High Density Ceramic Fiber Blanket. No need pre-rigidized insulation coating. Superior durability and resist high velocity firing. Roll formed premium grade rugged and durable 0.15 thick heavy duty steel.
Anti-impact, anti-corrosion and anti-rust for long-lasting reliability. Unique double burners square design and vertical firing system allow maximizes your metals exposure to the flame in the best position, and allowing for a more even and faster firing. Connect the hose to your propane tank, then spray some soapy water and check for any leaks. Insert the gas inlet pipe into the red tube and then tighten the screw with a hex wrench. Insert the red tube into forge, keep the tube bottom flush with the inner top, then tighten all screws.
Place the tank a safe distance and put the forge in a stable place, then put the fire brick into it. Open the gas pressure regulator little, then ignite it and adjust the regulator. Finished, let's start forging! The United States package usually takes about 2-4 days to reach you. The actual time depends on the distance between the destination and the warehouse and the schedule of the post office.International package usually takes about 7-20 days to reach you. We try our best to reply to your emails as soon as possible, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately.
Please allow 24 hours for us to response. Your understanding will be highly appreciated! This item is in the category "Collectibles\Tools, Hardware & Locks\Tools\Blacksmithing". The seller is "enginerepair-international" and is located in this country: US.This item can be shipped to United States.